Kenwood CookEasy+ CCL50, Instructions Manual

Page: 28 / 58

24
Troubleshooting Guide – Continued
Problem Cause Solution
Leaking from lid during
processing. Lid seal not fitted correctly
to lid. Refer to ‘Care and Cleaning’
for how to fit the seal.
Stir speed cannot be
increased. Bowl or ingredients
temperature above 105˚C. Normal operation.
Stir speed restricted to speed
6 when bowl or ingredients
temperature above 105˚C.
Leaking from the base
of the bowl. Bowl drive or plug seal not
fitted correctly. Check bowl seal is in place
and fitted correctly.
Timer not counting
down on display screen. During the heating stage
the timer will not count
down until the correct
temperature is reached.
Temperature set above
100˚C but water content
of food preventing
temperature going above
100˚C. Normal operation.
Reduce or select correct
temperature.
Temperature of bowl
contents does not go
above 100˚C. Water content of
ingredients may prevent
the temperature from going
above 100˚C. Normal operation.
Heavy movement
or vibrations during
operation. Uneven load in bowl causing
excessive vibrations.
Maximum capacity
exceeded.
Wrong tool or speed used. Reduce quantity or rearrange
food in bowl and restart unit.
Refer to the relevant
programme and
recommended speed charts
for correct tool and speed
to use.
Display shows error
message E:34 WiFi credentials issue. Check WiFi Password.
Forget WiFi network, go to
Settings
> WiFi > Forget
Network.
Restart Appliance Setup from
the Kenwood World App.
slow flashing
Unable to find known WiFi
network Appliance may have moved,
router may be turned off or
may require a restart.
fast flashing
WiFi available, but unable to
connect to cloud servers. Router may require a restart,
or contact your Internet
Service Provider.