background image

CMOS-310/CMOS-210

   

|

   

15

ENGL

ISH

Camera Unit (CMOS-310)

Output video

:  Wide-angle mirror image (for rearview)/wide-

angle normal image (for front view)

Sensor: 

1/4-inch color CMOS sensor

Number of pixels

:  Approx. 310,000 pixels

Lens

:  Wide angle, Focal length f=0.82 mm, F value 2.4

Angles of view

: Horizontal: Approx. 190°
:  Vertical: Approx. 151°

Video output

: 1.0 Vp-p/ 75Ω

Illumination range

: Approx. 0.9 to 100,000 lux

Iris system

: Electronic iris

Scanning system

: Interlace

Synchronizing system

: Internal synchronization

Dimensions (WxHxD)

: 24 x 24 x 24.9 mm

Weight

: Approx. 36 g (without cable)

Camera Unit (CMOS-210)

Output video

:  Wide-angle mirror image (for rearview)

Sensor

: 1/4-inch color CMOS sensor

Number of pixels

:  Approx. 310,000 pixels

Lens

: Wide angle,  Focal length f=1.41 mm, F value 2.3

Angles of view

: Horizontal: Approx. 130°
:  Vertical: Approx. 101°

Video output

: 1.0 Vp-p/ 75Ω

Illumination range

: Approx. 0.9 to 100,000 lux

Iris system

: Electronic iris

Scanning system

: Interlace

Synchronizing system

: Internal synchronization

Dimensions (WxHxD)

: 24 x 24 x 24.9 mm

Weight

: Approx. 34 g (without cable)

Switch Unit (CMOS-310 only)

Dimensions (WxHxD)

: 27.5 x 32.8 x 12 mm

Weight

: Approx. 10 g (without cable)

General

Operating voltage

: 14.4V (9.0 V – 16.0 V)

Max. current consumption (CMOS-310)

: 80 mA

Max. current consumption (CMOS-210)

: 60 mA

  Mirror image means that the video image inverts the left 

and right just like the image seen on the rearview mirror 
or a side mirror.

•  Specifications subject to change without notice.

This Product is not installed by the manufacturer of a vehicle 
on the production line, nor by the professional importer of a 
vehicle into an EU Member State.

Information on Disposal of Old Electrical and 
Electronic Equipment and Batteries (applicable for 
EU countries that have adopted separate waste 
collection systems)

  Products and batteries with the symbol (crossed-

out wheeled bin) cannot be disposed as 
household waste.
Old electrical and electronic equipment and 
batteries should be recycled at a facility capable 
of handling these items and their waste 
byproducts.
Contact your local authority for details in 
locating a recycle facility nearest to you.
Proper recycling and waste disposal will help 
conserve resources whilst preventing 
detrimental effects on our health and the 
environment.
Notice:  The sign “Pb” below the symbol for 

batteries indicates that this battery 
contains lead.

Specifi cations

  

 

Summary of Contents for CMOS-210
















Reviews: