Kenwood CMOS-210 Instruction Manual Download Page 11

Page: 11 / 15

CMOS-310/CMOS-210

ENGL

ISH

Wide View Guideline Adjustment (Size)

This item adjusts the overall size of guidelines displayed in
the wide view.

Select “WIDE VIEW GUIDELINE ADJUSTMENT

(Size)”.

Press the + or – button of the switch unit to

adjust the size.

After completing the adjustment, press the

view button.

Advances to “WIDE VIEW GUIDELINE

ADJUSTMENT (Horizontal direction)”.

Wide View Guideline Adjustment
(Horizontal Direction)

This item adjusts the left-right positioning of the
guidelines displayed in the wide view.

Select “WIDE VIEW GUIDELINE ADJUSTMENT

(Horizontal direction)”.

Press the + or – button of the switch unit to

adjust the left-right positioning.

After completing the adjustment, press the

view button.

Advances to “WIDE VIEW GUIDELINE

ADJUSTMENT (Vertical direction)”.

Summary of Contents for CMOS-210
















Search results

Summary of Contents for CMOS-210

Reviews:

Related manuals for CMOS-210

Brands by name

Popular brands

Kenwood CMOS-210, Instruction Manual

Search results

Summary of Contents for CMOS-210

Reviews:

Related manuals for CMOS-210

Brands by name

Popular brands