KENT INDUSTRIAL (USA) INC.
1231 Edinger ave.,Tustin,CA.92780 U.S.A.
Tel
：
(714)258-8526 Fax : (714)258-8530
1-2-7. When the machine is performing
1.
【
Warning
】
1. The long hair must be tied neat and put under the cap.
2. Please do not push any control button with glove in case of the malfunction.
3. When carrying huge work-piece, it should be more than 2 people to carry it
in order to prevent the danger.
4. Only the experienced, and well-trained people could operate the lifter,
crane, sling, and other lifting devices.
5. When operating the lifter above (lifter, crane), please do not collide with
other devices.
6. When hanging the work piece, please confirm the strength of slings, belts
and ropes.
7. Please make sure the work piece is fixed stably.
8. The coolant flux should be adjusted when the machine is stopped.
9. Please do not touch the functioning working piece or spindle.
10. The working piece and the cutter must keep a safety distance, and the
working piece only can be carried when the spindle is stopped.
11. When the machine is running, please do not clean the chips with hands or
rags.
12. Do not machine on the working piece be before installing the safety guards,
and splashguards.
13. Please clean the cutter with brush. DO NOT use hands.
14. When machining the magnesium alloy, please wear the protection mask.
2.
【
Attention
】
1. Please do not open the door and window during running.
2. During heavy load machining, please pay highly attention on the jumped-out
chips in order to avoid the burning of skin.
1-2-8. End of machining
1.
【
Warning
】
When end of the machining, please turn NFB switch to OFF position.
1-2-9. End of work
1.
【
Attention
】
1. When cleaning the chips on the machine, please wait for the stop of the
machine.
2. All of the cutters, tools and parts must be return to its own position.
3. Please inspect the damaged felt wipers, and replace it when necessary.
1 - 6
Property of Kent Industrial USA
Do Not Reproduce
