KENT INDUSTRIAL (USA) INC.
1231 Edinger ave.,Tustin,CA.92780 U.S.A.
Tel
：
(714)258-8526 Fax : (714)258-8530
2 - 1
【
Chapter 2 Carry and Stock
】
2-1.
Packing of the machine:
Crate size ( L
×
W
×
H)
：
2185×2000×2350 mm
Net weight
：
2000 kgs
Gross weight
：
2200 kgs
※
The machine packaged in a crate for transportation is a standard transportation
method, unless the buyer asks for other method for package.
2-2.
The carry of equipment:
2-2-1.
The lifter’s requirement:
Machine weight
：
2,200kgs
Fork Length
：
1,300mm
** The forklifter must be capable of lifting at least this weight.
The sling must be capable of lifting at least this weight.
The trailer or the dray must be capable of transporting at least this weight and length
2-2-2.
The safety requirement of carry
1. Crane:
(1) During the carry and unloading, please avoid compression or collision
because of the fact this machine is a high precision machine. (The speed
must be lower than 25m / min)
(2) Jog the table to the machine’s center, and the head to the bottom. Then fix
the head by stationary barrier.
(3) The counterweight is locked by the stationary barrier.
(4) Place a pad between the doors, pull them closed, and secure them with two
wire ties through the handles.
(5) The lube unit’s exhausting holes must be locked.
(6) The carry method and the lifter should be totally inspected.
(7) The crane or forklifter’s operator should be well trained or experienced.
(8) The loose parts should be pulled tight when lifting. And the contact surface
of machine should be protected by the rags or woods in case of the scratch.
(9) In order to prevent the swing of the machine, please tight a strengthened
rope on a corner of the machine. The hands are extremely forbidden.
Property of Kent Industrial USA
Do Not Reproduce
