KENT INDUSTRIAL (USA) INC.
1231 Edinger ave.,Tustin,CA.92780 U.S.A.
Tel
：
(714)258-8526 Fax : (714)258-8530
1-2-2. Before starting the machine
Before starting, make sure the power supply is grounded correctly and exactly.
Hazard objects
：
Before operating, please inspect all the ropes, slings, and electric wires are in
the correct position in order to prevent the pulling, pushing, or entanglement
of wires and the electricity leakage, or any dangers of the machine.
1.
【
Warning
】
1. Please make sure the operator understanding all the instructions, being
familiar with every function and working procedure.
2. Please wear the anti-slip boots, and the security clothing.
3. Please make sure all the safety doors and guards that are protected the NC
unit, controller, electric cabinet… etc. being closed.
2.
【
Attention
】
1. The electric wires must be fixed on the floor and isolated by insulation
sleeves in order to prevent the chips damage the wire’s insulation and the
shortcut.
2. Before operating the machine that didn’t operate for a long time, or a new
machine, please make sure the slide ways are well - lubricated.
3. Please fill up all the oil containers in each part.
4. Please lubricate each pointed point, use the recommended lubricating oil
and maintain the suitable oil volume in accordance with the instructions on
the nameplate.
5. Please inspect each button and handle operating smoothly.
6. Please inspect the coolant volume.
7. Please make sure the power supply switch of the factory, the main power
switch of the machine, and main circuit switch are turned to “ON” position.
1-2-3. After the power switch is turned ON
1.
【
Attention
】
When the power switch is turned to
ON
position, the
READY
light will light
up. If not, please inspect the malfunction’s position.
1-2-4. Routine inspection
1.
【
Warning
】
When inspecting the belt, please do not stretch your hands between belt
and belt pulley.
1 - 4
Property of Kent Industrial USA
Do Not Reproduce
