ALIGNMENT OF HEAD:
In case of precision work where it is necessary to have head perfectly spuare wuth the table,
use method described below. To set head square with table, see Figures 4. Loonsen four
locknets (143#,page 34).but leave longitudinal axis.mount indicator as shown in Figure 4.
LOCKNUTS
LUBRICATION:
Do not operate until properly lubricated:
(A) way surfaces and lead screws
Sunoco waylub #80 or equivalent.
(B) Milling Heads (Spindle Bearing)
S.A.E. 10 or 1 OW light oil.
(C) Motors are greased for life of bearings.
-9-
Figure 4. Head Alignment X Axis
Property of Kent Industrial USA
Do Not Reproduce
