background image

PROOF OF PURCHASE

To receive warranty retain receipt as proof of purchase. 

IMPORTANT!  NEVER COVER THIS HEATER!

SPECIFICATIONS

Model No TWOC340

Voltage 220-240VAC 50HZ

Wattage 2000-2400W

SUPPORT AND TECHNICAL ADVICE

North Shore City, Auckland, New Zealand

Monday 

– Friday 8am-5pm

Phone: 0800 232 633

CARE AND CLEANING
The appliance requires regular cleaning to ensure trouble free operation:
Unplug the appliance from the mains supply before cleaning.
Ensure that the appliance has been allowed to cool down completely before cleaning.
Use a damp cloth (not wet) to wipe the exterior of the appliance to remove dust and dirt.
Never use solutions such as benzene, thinners or polishing agents.
Use a vacuum cleaner to remove dust and fluff from around the grills and fins.
Ensure the appliance is dry before plugging back into the mains supply.

This appliance is filled with a precise quantity of special oil. Repairs requiring opening of
the oil container are only to be made by the manufacturer or his service agent who
should be contacted if there is an oil leak. When scrapping the appliance, follow the
regulations concerning disposal of oil.

Do not attempt to dismantle the appliance. There are no user serviceable parts. For service or repair,
contact an authorised electrical service technician.

SAFETY DEVICES
This appliance has two protection devices:
1.

Resettable thermal link - this will automatically disconnect the power to the appliance at a pre-set 
overheat temperature. After cooling down it will reset and power on again. If this occurs, investigate 
what is causing the appliance to overheat.

2.

Thermal fuse - this disconnects the appliance permanently in case of overheating. (It is non 
resettable).

CAUTION: The appliance generates heat during use.  Proper precautions must be taken to prevent the 
risk of burns, scalds, fires or other damage to persons.

Summary of Contents for TWOC340













Reviews: