OPERATING YOUR HEATER
Always choose a safe location for the heater, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. This appliance
requires no installation, it should be used solely as a portable appliance.
WARNING: THIS IS A DOUBLE SIDED HEATER. Keep all objects at least 1 metre from the
front, sides and rear of the appliance.
WARNING: In order to avoid overheating or risk of fire, do not cover the heater.
WARNING: Never leave this appliance unattended when in use.
WARNING: Do not use this appliance with a programmer, remote-control system, separate
timer or any other device that switches the appliance on automatically.
Note: When the appliance is turned on for the first time, it may release a slight odour. This
odour is a normal occurrence caused by the initial heating of the internal heating elements
and should not occur again.
1.
Press the POWER button once to start the heater on High Power.
If left at this setting, the heater will run continuously on High Power and will not shut off until the unit
is turned off manually or the room temperature reaches over 30
º
C.
2.
Press the POWER button again to change to Medium Power.
If left at this setting, the heater will run continuously on Medium Power and will not shut off until the unit
is turned off manually or the room temperature reaches over 30
º
C.
3.
Press the POWER button again to change to Low Power.
If left at this setting, the heater will run continuously on Low Power and will not shut off until the unit
is turned off manually or the room temperature reaches over 30
º
C.
4.
Press the POWER button a fourth time to turn the heater OFF.
HEAT CONTROL SWITCH
Check that the Power Switch under the Control Panel is set to the Off position ‘0’ before plugging the
heater in and turning on the mains supply. Turn the Power Switch to ‘I’ position to switch on.
Celsius/Fahrenheit
Power Button
Mode
POWER SWITCH
Increase
Temperature/Time
Decrease
Temperature/Time
LCD Screen
CONTROL PANEL