OPERATING YOUR HEATER
Press the POWER button and the heater enters into standby mode. The screen will blink at
one second intervals.
Press the MODE button and the heater enters into heating status. The screen blinks at
one second intervals.
Press the ‘+’ or ‘-’ button to set the desired temperature from 13
º
C to 30
º
C.
For example, press ‘+’ one time to set temperature to 25
º
C.
For example, press ‘-’ button one time to set the temperature to 23
º
C.
The temperature can be converted from Celsius to Fahrenheit by pressing the C/F button.
The following screen shows an example of 24
º
C converted to Fahrenheit being 75
ºF.
Please note:
The temperature display will not reflect
the accurate room temperature until the heater has
been operating for at least 20 minutes.
