4
5
b. Re-establishing a Wireless Connection:
If the connection between your mouse and receiver is broken (mouse is in proper
working order working with good batteries, and the receiver is installed properly,
yet it is not working), you may need to re-establish a wireless connection.
c. To Re-establish a Wireless Connection:
With the USB receiver in position and mouse turned on, press the “connect” button on
the receiver (1), and within 30 seconds, also press the “connect” button on the bottom
of the mouse (2). You have now established a new connection for the mouse.
If this does not work, try repeating these steps while holding the mouse close to the
receiver. This step may need to be repeated 2–3 times for the mouse to synchronize.
If necessary, repeat this procedure after replacing depleted batteries.
IMPORTANT: This wireless device is similar to an FM radio, the position of your
computer and surrounding objects (especially metal objects) may effect your wireless
reception and range (average range is approximately 10 meters or 30 feet).
Optional Battery Saving Feature
To preserve battery life when not using the mouse for long periods of time, slide the switch
(3) to OFF.
3
OF
F/O
N
CON
NEC
T
OFF / ON
Registering Your Kensington Product
Register your Kensington product online at
www.kensington.com
.
Common Troubleshooting Steps
1. Unplug and re-plug the receiver. Repeat steps
2b
to
2c
to re-establish a wireless
connection.
2. Install a fresh set of batteries in the mouse.
3. Test the device on another USB port or computer.
4. Some surfaces may “trick” the optical sensor, such as reflective surfaces like glass or
mirrors. The optical sensor should perform well on all other surfaces.
5. To establish a wireless connection, see steps
2a
to
2c
.
6. To save battery power, turn off the mouse when not in use. See
Optional Battery
Saving Feature
.
Health Warning
Use of a keyboard, mouse, or trackball may be linked to serious injuries or disorders. Recent
medical research of occupational Injuries has linked normal, seemingly harmless activities
as a potential cause of Repetitive Stress Injuries (“RSI”). Many factors may be linked to the
occurrence of RSl, including a person’s own medical and physical condition, overall health, and
how a person positions and uses his or her body during work and other activities (including
use of a keyboard or mouse). Some studies suggest that the amount of time a person uses a
keyboard, mouse, or trackball may also be a factor. Consult a qualified health professional for
any questions or concerns you may have about these risk factors.
When using a keyboard, mouse, or trackball, you may experience occasional discomfort in
your hands, arms, shoulders, neck, or other parts of your body. However, if you experience
symptoms such as persistent or recurring discomfort, pain, throbbing, aching, tingling,
numbness, burning sensation, or stiffness, even if such symptoms occur while you are not
working at your computer.
DO NOT IGNORE THESE WARNING SIGNS. PROMPTLY SEE A
QUALIFIED HEALTH PROFESSIONAL
. These symptoms can be signs of sometimes permanently
disabling RSI disorders of the nerves, muscles, tendons, or other parts of the body, such as
carpal tunnel syndrome, tendonitis, tenosynovitis, and other conditions.
Technical Support
Technical support is available to all registered users of Kensington products. Technical
Support contact information can be found on the back page of this manual.
Web Support
You may find the answer to your problem in the Frequently Asked Questions (FAQ)
section of the Support area on the Kensington Website:
www.support.kensington.com
.
Telephone Support
There is no charge for technical support except long-distance charges where applicable.
Please visit
www.kensington.com
for telephone support hours. In Europe, technical support is
available by telephone Monday to Friday 09:00 to 21:00 (Central European time).
Please note the following when calling support:
• Call from a phone where you have access to your device.
• Be prepared to provide the following information:
– Name, address, and telephone number
– Name of the Kensington product
– Make and model of your computer
– System software and version
– Symptoms of the problem and what led to them
FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses. and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
