background image

28

6 - YEAR LIMITED WARRANTY ON WATER HEATER

For six years from the date of purchase, if this water heater is installed and operated in a single-family home in accordance
with the owner’s manual instructions and all local applicable plumbing codes, Sears will:

1.

Supply free water heater parts for those that are defective in material or workmanship.

2.

Supply a free water heater for one that develops a leak.

For the second through sixth year from the purchase date, you must pay the labor cost for installation of parts or water
heater.

For commercial, institutional, industrial or residential use by two or more families, the above limited warranty is only for
two years. During the second year you must pay the labor cost for parts or water heater installation.

1 - YEAR EXCLUSIVE KENMORE LABOR WARRANTY

For the first year from the date of purchase, Sears will, free of charge, supply and install new water heater parts for
defective ones or a new water heater for one that develops a leak.

WARRANTY SERVICE

To obtain warranty service, call 1-800-4-MY-HOME

®

 (1-800-469-4663).

This warranty applies only while this product is in use in the United States.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

The model number of your water heater is found on the model rating plate on the front of the water heater.

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A

The price of your water heater does not include a free checkup service call

. On water heater installations arranged by Sears,

Sears warrants the installation.
A charge will be made on service calls due to poor or incomplete installation. These include:

a. Adjusting thermostat

c. Condensation          b. Leaks in pipes or fittings

MASTER PROTECTION AGREEMENTS

Congratulations

 on making a smart purchase. Your new

Kenmore

®

 product is designed and manufactured for years of

dependable operation. But like all products, it may require
preventive maintenance or repair from time to time. That’s when
having a Master Protection Agreement can save you money and
aggravation.

Purchase a Master Protection Agreement now and protect yourself
from unexpected hassle and expense.

The Master Protection Agreement also helps extend the life of
your new product. Here’s what’s included in the Agreement:

Expert Service

 by our 12,000 professional repair specialist.

Unlimited service and no charge

 for parts and labor on all

covered repairs.

“No-lemon” guarantee

 - replacement of your covered product

if four or more product failures occur within twelve months.

Product replacement

 if your covered product can’t be fixed.

Annual Preventive Maintenance Check

 at your request - no

extra charge.

Fast help by phone

 - phone support from a Sears technician

on products requiring in-home repair, plus convenient repair
scheduling.

Power surge protection

 against electrical damage due to

power fluctuations.

Rental reimbursement

 if repair of your covered product takes

longer than promised.

Once you purchase the Agreement, a simple phone call is all that

it takes for you to schedule service. You can call anytime day or
night, or schedule a service appointment on-line.

Sears has over 12,000 professional repair specialists, who have

access to over 4.5 million quality parts and accessories. That’s
the kind of professionalism you can count on to help prolong the
life of your new purchase for years to come. Purchase your Master
Protection Agreement today!

Some limitations and exclusions apply. For prices and
additional information call 1-800-827-6655.

SEARS INSTALLATION SERVICE

For Sears professional Installation

 of home appliances, garage

door openers, water heaters, and other major home items, in the
U.S.A., call 

1-800-4-MY-HOME

®

.

For in-home major brand repair service

Call 24 hours a day, 7 days a week (U.S.A. and Canada)

1-800-4-MY-HOME

®

(1-800-469-4663)

www.sears.com

SEARS, ROEBUCK AND CO., Dept.817WA, Hoffman Estates, IL 60179

Summary of Contents for POWER MISER 153.326162





























Reviews: