19
HOW TO USE
TIME AND STATUS DISPLAY
The time and status display shows the estimated time remaining and cycle progress.
ESTIMATED TIME REMAINING
When a cycle is selected, the default time for
that cycle is displayed. This time will change as
modi
fi
ers or options are selected. Once the START/
PAUSE button is pressed, the washer will measure
the size of the load. The estimated time may
change once the load size has been measured.
NOTE:
The time shown is only an estimate. This
time is based on normal operating conditions. Sev-
eral external factors (load size, room temperature,
incoming water temperature, etc.) can a
ff
ect the
actual time.
CYCLE STATUS INDICATOR
These LEDs will illuminate when a cycle is selected
to indicate which stages will run. When a cycle
is running, the LED will blink for the active stage.
Once a stage is complete, the LED will turn o
ff
. If a
cycle is paused, the active LED will stop blinking.
A
B
A
B
Summary of Contents for 796.3141#31#
Page 66: ...66 NOTA ...
Page 67: ...67 NOTA ...
