28
Oven Controls
To turn the oven off and keep the Sabbath feature active:
Press
STOP
.
To turn off the Sabbath feature:
Press and hold both
Cook Time
and
Delay Start
simultaneously
for at least 3 seconds to turn the Sabbath feature off. The
control will provide an acceptance tone, and
SAb
will
disappear from the display. The oven is no longer programmed
for the Sabbath feature.
What to do during a power failure or power interruption after
the Sabbath feature was activated:
Should you experience a power failure or interruption, the oven
will shut-off. When power is restored the oven will not turn back
on automatically. The oven will remember that it is set for the
Sabbath, and the oven display will show the message
SF
for
Sabbath failure (
Figure 29
).
The food may be safely removed from the oven while still in the
Sabbath feature, however the oven cannot be turned back on
until after the Sabbath/Holidays. After the Sabbath obser-
vance turn off the Sabbath feature. Press and hold both
Cook
Time
and
Delay Start
keys for at least 3 seconds simultaneously
to turn the Sabbath feature off.
SF
will disappear from the
display, and the oven may be used with all normal functions.
Restoring Factory Default Settings
Your appliance was set with predetermined (default) oven
control settings. Over time, users may have made changes to
these settings. The following options may have been modified
since the appliance was new:
•
12 or 24 hr display mode
•
Meat Probe settings (Continue/Cancel cooking and start
Keep Warm)
•
Continuous bake or 12 hour energy savings mode
•
Silent or audible control
•
Oven temperature display (Fahrenheit or Celsius)
•
Oven temperature adjustments (UPO)
If
you choose to restore any of the options to a
factory default setting using this method, all of the above user
settings will be restored to the factory default settings. This
includes the oven temperature offset that will reset to (0) zero
To restore oven control to factory default settings:
1.
Press and hold
7
on numeric keypad until acceptance tone
sounds (about 6 seconds).
2.
Press
START
. The control has been reset with the default
settings.
Adjusting Oven Temperatures
Your appliance has been factory calibrated and tested to
ensure accurate baking temperatures. For the first few uses,
follow your recipe times and temperature recommendations
carefully. If you think the oven is cooking too hot or too cool for
your recipe times, you may adjust the control so the oven cooks
hotter or cooler than the oven temperature displayed.
The oven temperature may be increased as much as +35°F
(+19°C) or decreased -35°F (-19°C) from the factory cali-
brated settings.
To increase (+) or decrease (-) the oven temperature by 20°F:
1.
Press and hold
Bake
until the control produces an audible
tone (about 6 seconds). The factory offset temperature of
0 (zero) should appear in the display.
2.
Enter
2 0
using numeric keypad.
3.
To offset the oven by -20°F, press the
Down arrow
key until
the display reads
-20
.
4.
Press
START
to accept change.
Important note:
•
Oven temperature adjustments will not change the Broil or
Self Clean function temperatures.
•
Do not use oven thermometers such as those found in
grocery stores to check the temperature settings inside your
oven. These oven thermometers may vary as much as 20 to
40°F degrees from actual temperatures.
•
The oven temperature adjustment may be made if your
oven control is set to display temperatures in °C (Celsius).
Minimum and maximum settings for Celsius range from plus
(+)19°C to minus (-) 19°C.
Figure 29: Display showing Sabbath Failure
