background image

33

Care and Cleaning

Cooktop Maintenance

Consistent and proper cleaning is essential to maintaining your 
ceramic glass cooktop. 

Prior to using your cooktop for the first time, apply a ceramic 
cooktop cleaning cream (available in most hardware, grocery 
and department stores) to the ceramic surface. Clean and buff 
with a clean paper towel. This will make cleaning easier when 
soiled from cooking. Cooktop cleaning creams leave a protec-
tive finish on the glass to help prevent scratches and abrasions.

Sliding aluminum or copper clad bottom pans on the cooktop 
can cause metal markings on the cooktop surface. These marks 
should be removed immediately after the cooktop has cooled 
using the cooktop cleaning cream. Metal marks can become 
permanent if not removed prior to future use. Cookware (cast 
iron, metal, ceramic or glass) with rough bottoms can mark or 
scratch the cooktop surface.

Important: 

Do not slide anything metal or glass across the cooktop. 

Do not use cookware with dirt or dirt build up on bottom; 
replace with clean cookware before using. 

Never use your cooktop as a cutting board or work surface 
in the kitchen. 

Do not drop heavy or hard objects on the ceramic glass 
cooktop, they may cause it to crack.

Broiler Pan Cleaning Tips

To prevent grease from baking on, remove the broiler pan from 
the oven as soon as cooking is completed. Use potholders or 
oven mitts because the broiler pan is extremely hot. Pour off 
grease. Soak the pan in hot, soapy water. Clean the broiler pan 
and insert as soon as possible after each use. If necessary, use 
soap-filled steel wool pads. Heavy scouring may scratch the 
insert.

Aluminum Foil, Aluminum Utensils, and Oven Liners

Never cover any slots, holes, or passages in the oven bottom or 
cover an entire oven rack with materials such as aluminum foil. 
Doing so blocks air flow through the oven and may cause carbon 
monoxide poisoning. Aluminum foil linings may trap heat, causing 
a fire hazard.
Protective liners—Do not use aluminum foil to line the oven 
bottom. The high heat of the oven can melt these materials to the 
oven cavity and ruin the oven. These types of materials can also 
reduce the effectiveness of the air circulation in the oven and 
produce poor baking results. 

Only use aluminum foil as recommended in this manual. 
Improper installation of these liners may result in risk of electric 
shock or fire.

Aluminum foil

 - Use of aluminum foil on a hot cooktop can 

damage the cooktop. Do not use thin aluminum cooking 
utensils or allow aluminum foil to touch the surface elements 
under any circumstances.

Aluminum utensils

 - The melting point of aluminum is much 

lower than that of other metals. If aluminum pans are 
allowed to boil dry when using the cooktop, the utensil will 
be damaged or destroyed.

Oven  racks

 - Do not use aluminum foil to cover the oven 

racks. During self clean the oven temperature can become 
hot enough to melt aluminum cooking utensils or aluminum 
foil and could result in permanent damage to the oven 
interior and porcelain finish.

Figure 33:  Do not slide cookware across cooktop

Figure 34:

Broil pan and inser

t

Summary of Contents for 790.9799 series









































Reviews: