background image

17

Oven Controls

Changing Between Continuous Bake Setting or 12 Hour 
Energy Saving

 

The oven control has a factory preset built-in 12 Hour Energy 
Saving feature that will turn off the oven if the oven is left on 
for more than 12 hours. The control may be programmed to 
override this feature to bake continuously.

To change between continuous bake or 12 hour energy 
saving feature:

1.

Press and hold 

Timer ON/OFF

 for 6 seconds

2.

Press the 

Up / Down

 

arrow

 keys to toggle between 

12 

Hour OFF

 or 

Stay On 

feature (

Figure 13

).

3.

Press 

START

 to accept choice.

Changing Temperature Display to Fahrenheit (ºF) or 
Celsius (ºC

)

The electronic oven control is set to display °F when shipped 
from the factory. The display may be changed to show either °F 
or ºC oven temperatures.

To change temperature display mode from °F to °C or from 
°C to °F:

1.

Press and hold 

Broil

 for 6 seconds.

2.

Once 

F (or C)

 appears in the display, press the 

Up / Down

 

arrow

 keys to toggle between Fahrenheit and Celsius 

temperature display modes (

Figure 14

).

3.

Press 

START

 to accept the choice.

Important note: 

The oven temperature display cannot be changed during the 
cooking process or if a Delay Start has been set or Self Clean is 
active.

Setting Silent or Audible Control mode

Silent mode allows the oven control to operate without audible 
tones. The control may be programmed for silent operation and 
later reset to operate with all the normal audible tones.

To set for silent or audible mode:
1.

Press and hold 

Delay Start

 for 6 seconds.

2.

Press the 

Up / Down

 

arrow

 keys to toggle between 

bEEP 

On

 or 

bEEP OFF

 (

Figure 15

).

3.

Press 

START

 to accept the choice. 

Setting Oven Lock

The control may be programmed to lock the oven door and lock 
the oven control keys

.

To activate the oven lock feature:

1.

Be sure oven door is completely closed.

2.

Press and hold both the 

Oven Lock 

key for 3 seconds.

 

The 

motor driven door latch mechanism will begin locking the 
oven door automatically. Do not open the oven door. Allow 
about 15 seconds for the oven door to completely lock. 
Once door is locked, the word

 DOOR 

with a lock icon will 

appear in the display.

To cancel the oven lockout feature:
1.

Press and hold both the 

Oven Lock 

key for 3 seconds. The 

motor door latch will begin unlocking the oven door auto-
matically. Do not open the oven door. Allow about 15 
seconds for the oven door to completely unlock.

2.

When the word

 DOOR 

with a lock icon no longer displays, 

the oven door may be opened, and the oven control 
keypad will be available for use.

Important note: 

To avoid damage to the oven door latching mechanism, do 
not attempt to open or close the oven door whenever the 
word

 DOOR 

with a lock icon is displayed.

If a control key is pressed when oven lockout is active, the 
control will triple beep indicating the key action is not 
available when the oven lockout feature is active.

Figure 13:  12 Hr and continuous operation settings

Figure 14:  Display showing Fahrenheit and Celsius

Figure 15:  Display showing audible and silent operation

Summary of Contents for 790.9799 series









































Reviews: