Kenmore 790.9799 series Use & Care Manual Download Page 4

Page: 4 / 40

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this appliance.

Save these instructions for future reference.

IMPORTANT INSTRUCTIONS FOR UNPACKING
AND INSTALLATION

IMPORTANT - Read and follow the below

instructions and precautions for unpacking,

installing, and servicing your appliance:

•

Remove all tape and packaging before

using the appliance. Destroy the carton

and plastic bags after unpacking the

appliance. Never allow children to play

with packaging material. Do not remove

the wiring label and other literature

attached to the appliance. Do not remove

model/serial number plate.

•

Cold temperatures can damage the elec-

tronic control. When using this appliance

for the first time, or when the appliance

has not been used for an extended

period of time, be sure the appliance has

been in temperatures above 32ºF (0ºC)

for at least 3 hours before turning on the

power to the appliance.

•

Never modify or alter the construction of

the appliance by removing the leveling

legs, panels, wire covers, anti-tip

brackets/screws, or any other part of the

appliance.

•

Be sure to have an appropriate foam-

type fire extinguisher available, visible,

and easily accessible located near the

appliance.

GROUNDING INSTRUCTIONS

Avoid fire hazard or electrical

shock. Failure to follow this warning may

cause serious injury, fire, or death.

Avoid fire hazard or electrical

shock. Do not use an adapter plug, use an

extension cord, or remove grounding prong

from the power cord. Failure to follow this

warning may cause serious injury, fire, or

death.
Proper Installation—Be sure your appliance

is properly installed and grounded by a

qualified technician. In the United States,

install in accordance with the National Fuel

Gas Code ANSI Z223.1/NPFA No. 54, latest

edition and National Electrical Code NFPA

No. 70 latest edition, and local electrical

code requirements. In Canada, install in

accordance with CAN/CGA B149.1 and

CAN/CGA B149.2 and CSA Standard

C22.1, Canadian Electrical code, Part 1-

latest editions and local electrical code

requirements. Install only per installation

instructions provided in the literature

package for this appliance.
For personal safety, this appliance must be

properly grounded. For maximum safety, the

power cord must be securely connected to an

electrical outlet or junction box that is the

correct voltage, is correctly polarized and

properly grounded, and protected by a

circuit breaker in accordance with local

codes.
It is the personal responsibility of the

consumer to have the appropriate outlet or

junction box with the correct, properly

grounded wall receptacle installed by a

qualified electrician. It is the responsibility

and obligation of the consumer to contact a

qualified installer to assure that the electrical

installation is adequate and is in confor-

mance with all local codes and ordinances.

Summary of Contents for 790.9799 series









































Search results

Summary of Contents for 790.9799 series

Reviews:

Related manuals for 790.9799 series

Brands by name

Popular brands

Kenmore 790.9799 series, Use & Care Manual

Search results

Summary of Contents for 790.9799 series

Reviews:

Related manuals for 790.9799 series

Brands by name

Popular brands