AI 4 Pt/Ni/Tc
Kendrion Kuhnke Automation GmbH
156
The process data objects stored as variables in the EtherCAT master's control program are used to access
the input values and the module state.
Service data objects (SDO) are available for details and settings.
You may run the configuration tool offline and choose the "Startup Parameters" to change some settings of
module AI4-Pt/Ni/TC (such as the properties of each of the inputs). The EtherCAT master will apply the
settings when starting up the module.
You can also use the SDO transfer components available for the EtherCAT master to change settings at
runtime.
Click/tap on "Add…", choose an object, and set the appropriate value.
