12 / 20 – K410071299004-00 / 02.2021 –
©
www.kemper-olpe.de
Important notes for the system operator
The backwash automatic Figure 712 99 004
is allowed to be used solely for backwashing
the KEMPER Filter Figure 712 and KEMPER
Pressure reducing filter Figure 713. Any
different use or use beyond and above that is
considered nonintended use.
All electrical connections of the additional
features must be installed by a professional
electrician.
All malfunctions that could impair safety
must be immediately eliminated.
For safety reasons, fusing the backwash au-
tomatic through an FI-earth leakage circuit
breaker is required for the mains connection.
Do not use solvent-based care products for
cleaning.
Disposal
Local regulations on waste
recycling and disposal must
be followed. The product must
not be disposed of with house-
hold waste but must rather be
disposed of appropriately.
Installation and use
Read the manual carefully and follow the
instructions before installation!
Warning!
Installation
and maintenance
must be carried out by qualified plumbers.
Warning!
Priority must be given to the
national standards and provisions on Health
and Safety Regulations.
Warning!
The installation location must
be frost-proof and not prone to flooding.
Warning information
Please read and follow the warning infor-
mation in this instruction. Disregard of the
warning information may lead to injury or
material damage!
Labelling of important warning information:
Danger!
Electricity!
Indicates hazards that might
result in severe or fatal injury.
Warning!
Indicates hazards
that may result in injury, dama-
ge to property or contamination
of the drinking water.
Note!
Indicates hazards that
may lead to damages to the
system or malfunctions.
Safety instructions
During installation, observe:
DIN EN 1717 I DIN 1988
DIN EN 12056 I DIN 1868-100
