©
www.kemper-olpe.de
– 02.2021 / K410071299004-00 – 11 / 20
Table of contents
Safety instructions
11
1 Technical data
13
2 Application
14
3 Installation of backwash unit on
the module filter
14
4 Draining the backwash water
16
4.1 drained into a floor drain
16
4.2 with connection to the drainage
system
16
5 Inserting the batteries/fuse
17
6 Setting the backwash interval
17
7 Additional features
18
7.1 Triggering the backwash auto-
matic through the building
automation system (BAS)
18
7.2 Remote monitoring through
a BAS
19
Manufacturer‘s address
Gebr. Kemper GmbH + Co. KG
Harkortstraße 5
D-57462 Olpe
Tel.: +49 2761 891-0
Web: www.kemper-olpe.de
After-sales service
Service hotline
Tel.: +49 2761 891 800
Mail: [email protected]
About this manual
Read this manual carefully before starting
installation, commissioning, operation and
maintenance and follow the instructions!
Always pass on this manual to the current
system owner and keep it in a safe place for
future reference!
Illustrations in this manual serve for a basic
understanding and may differ from the actu-
al system configuration.
This manual is protected by copyright.
Copyright lies with the manufacturer.
Liability
The manufacturer assumes no warranty or
liability in the event of:
•
Failure to observe the instructions in this
manual.
•
Incorrect installation and/or operation.
•
Unauthorised modification of the pro-
duct.
•
Other faulty operation.
Intended use
For fully-automatic backwashing of the KEM-
PER Filter Figure 712 and the KEMPER Pres-
sure reducing valve Filter Figure 713.
Do not use the product for other purposes
than described above.
Only use the automatic backwash
- in sound condition
- as intended
Safety instructions
EN
