©
www.kemper-olpe.de
– 02.2021 / K410071299004-00 – 15 / 20
3.1
3.1
3.1
3.1
3.1
5
7
9
6
8
Close the ball valve with a pair of pliers so
that the surfaces are horizontal on the stem
(6).
Put the drive (14) on the stem adapter and
fasten with the two bolts (15) to the bracket
(7). After successfully installing the automatic
backwash, the mains plug can be plugged into
a 230 Volt socket- outlet nearby.
Attach the adapter, comprising the bracket
(7), expanding sleeve (8) and expansion
arbour (9) in the now free hole in the filter
base (10) until the bracket lies on the base
(11) and can no longer be axially rotated
(note position).
Plug the stem adapter (13) through the
expansion arbour (9) with the open side
plugged onto the stem.
Note!
After plugging in the mains
plug, a backwashing process
of approx. 25 sec. is triggered.
Surface horizontal
Note!
Tighten the expansion arbour
(9) with the tubular socket wrench
(12) with
approx. 25 Nm torque
.
