Service
KM00321,00000DA -19-22DEC11-2/3
KM00321,00000DA -19-22DEC11-3/3
KM00321,00000DB -19-22DEC11-1/1
NOTE: Install cleaners (D) and (E) with their cutting
edges pointing in the direction of cut.
Tighten all attaching screws of blade segments and
cleaners with the specified torque.
Specification
Screws (M8)—Torque.....................................................................28 Nm
20.65 lb-ft
Screws (M10)—Torque...................................................................51 Nm
37.62 lb-ft
A—Screws (M8)
B—Screws (M10)
KM1000828
—UN—26MAR09
Adjusting the Dividers
In order to prevent plugging and crop losses, the dividers
(A) have to be properly adjusted.
Always keep distance (X) between 3 and 7 mm (0.12 and
0.27 in.).
The specified distance (X) can be adjusted by means of
two slot holes (see arrows).
Specification
Dividers and Large
Drums—Distance from
Each Other............................................................................... 3 to 7 mm
0.12 to 0.27 in.
A—Divider
X—3 to 7 mm (0.12 to 0.27 in.)
KM1000834
—UN—27MAR09
KM1000165
—UN—16OCT07
55-5
120519
PN=70
