Lubrication and Periodic Service
OUKM001,0000012 -19-15FEB05-1/1
KM00321,00002CC -19-30APR10-1/1
KM00321,0000195 -19-10JUN09-1/1
Service Intervals
CAUTION: Before making any adjustments or
doing any service work, always:
- Switch the machine off
- Remove the key from the ignition
- Wait until all the moving parts have
come to a standstill.
IMPORTANT: The intervals quoted here are for average
conditions. Adverse operating conditions
may make it necessary to apply lubrication or
carry out an oil change more often.
IMPORTANT: Replace any damaged parts.
Any screws that have worked loose must be
retightened to the proper torque.
Clean grease fittings before lubrication. Replace lost or
damaged grease fittings immediately. If a new fitting fails
to take grease, remove it and check whether the grease
passage is blocked.
Perform lubrication and maintenance work mentioned in
this section before and after every harvesting season as
well.
Fluid Grease for Drives
The spur gear angle drives of the feed drums are filled
with fluid grease.
The following fluid greases are recommended:
Manufacturer
Designation
ARAL
ARALUB FDP 00
BP
ENERGREASE HT 00 EP
TEXACO
STARFAK E 900
WESTFALEN
GRESANAT X 00
Other fluid greases may be used if they meet the following
specification:
NLGI Service Classification NLGI 00
Transmission Oil
Use oil with a viscosity based on the expected air
temperature range during the period between oil changes.
Transmission oils must meet API Service Classification
GL-5.
TS1653
—UN—14MAR96
50-1
120519
PN=52
