Service
Continued on next page
KM00321,00000DA -19-22DEC11-1/3
Installing New Rotating Blades
KM1000821
—UN—24MAR09
A—Yellow Blade
B—Black Blade
C—Strap
D—Cleaner (Counterclockwise)
E—Cleaner (Clockwise)
F— Reinforcement Strap
CAUTION: Before carrying out adjustment
or service work, ALWAYS:
- shut off engine
- remove ignition key
- wait until all moving parts have come to a stop.
IMPORTANT: The rotating blades must be installed
with their tips pointing in the direction of cut (G).
1. There are different blades.
A total of 8 blades is installed on each rotating blade.
- 4 yellow blades (A), and
- 4 black blades (B)
2. The blades are installed in the following order: 2
yellow (A), then 2 black (B). Remember to tighten the
straps (C).
IMPORTANT: Install blades with the coated
side uppermost.
3. Remember to install cleaners (D) or (E) and
reinforcement straps (F) on the black or yellow blades,
depending on the type of the blade (coated (I) or
uncoated (II)), as shown in the relevant installation
scheme (I) or (II). Cleaner (D) is for counterclockwise
rotation, cleaner (E) is for clockwise rotation.
55-4
120519
PN=69
