manualshive.com logo in svg

KEMP Technologies LoadMaster 1500, Installation And Configuration Manual

Share
Download
KEMP Technologies LoadMaster 1500 Installation And Configuration Manual Download Page 54

  

54

Copyright © 2000 - 2005 KEMP Technologies, Inc. All Rights Reserved.

6.20.  Help 

 
Prints out a list of commands at the Virtual Service command level. 

 

6.21.  End 

 
Terminate the CLI session. No changes made in the Virtual Service command level (or lower) will be saved. 

 

6.22.  Exit 
 

Return the input to the top level. Any changes to the Virtual Service will be saved. If an error is detected in 

the Virtual Service, the system reports the error and asks if the Virtual Service should be discarded. If the 
Virtual Service is not discarded, the input remains at the virtual service level, where any corrections may be 

made. 

 

7.  Real Server command level 
 

At this command level, a specific Real Server may be configured. The following commands are 

available at this level. 
 

7.1.  Addrule <Rule-name> 

 
This command adds the rule <Rule-name> to a Real Server. If this is the first assignment of <Rule-name> to 

a Real Server on the current Virtual Service, the rule will be placed on the precedence list as the lowest user 

defined rule I.e. checked after all other rules. Use the Virtual Service command Precedence to change the 

precedence order. 
 

7.2.  Delrule <Rule-name> 

 
This command removes the association of rule <Rule-name> from the Real Server. If there are no more 

instances of the rule associated with the Virtual Service, the rule will be deleted from the Virtual Service 

precedence list. 
 

7.3.  Disable 

 

Disables the current Real Server. The Real Server will only be disabled in the current 
Virtual Service. If the Real Server is accessed via a different Virtual Service, then this 

Virtual Service will not be affected. 

 
7.4.  Enable 

 

Re-enable the current Real Server on this Virtual Service. If the Real Server has been disabled on multiple 
Virtual Services, these Virtual Services will not be affected. 

 

7.5.  Forward <forwarding method> 

 
This specifies the forwarding method, which should be used to access the Real Service. 

This can be either <nat> or <route>. By default the forwarding method is <nat>, <route> should only be 

selected when using “direct service return”. 
 

7.6.  Port <portspec> 

 
Specifies which port on the Real Server should be used. If no port is specified, then the port from the Virtual 

Service will be used. 

 

7.7.  Show 
 

Display the parameters for the current Real Server. 

 
7.8.  Weight <integer> 

Summary of Contents for LoadMaster 1500








































































Reviews:

No comments

Brands by name

Popular brands

Load more brands