KEMP Technologies LoadMaster 1500 Installation And Configuration Manual Download Page 45 | Manualshive

Page: 45 / 71

background image

45

Copyright © 2000 - 2005 KEMP Technologies, Inc. All Rights Reserved.

The “scp” - secure copy – transfer method may be selected. This is more secure than “ftp” but is normally

only supported on UNIX servers. If this mode is selected, the transfer of SSL certificates can only be
performed via the menu system and not via the Web interface.

Use http protocol

Using this transfer method, backups to a remote server cannot be performed.

Software patches can however be downloaded from any Web server where the patch has been made

available.

7.3. Network Time Protocol Host

The time on the LoadMaster can be synchronized to an NTP server. The time will be synchronized at boot time

and every then on an hourly basis. Using this option, the address of the NTP server can be specified.

7.4. SSL certificate administration

This option permits the administration of currently installed SSL certificates. A list of virtual services, which

have SSL acceleration enabled, is given. Selecting a virtual service allows the certificates for the service to be
managed. Selecting the local option allows the certificate used for the Web interface to be regenerated.

Get a certificate file

This option allows the user to download a certificate file for the virtual service.

Note: the SCP protocol may be used to transfer certificate files.

Get a key file

This option allows the user to download a private key file for the virtual service. If a private key is included in
the certificate file, no additional private key file is required.

Delete the key and certificate files

Allows the user to delete a certificate and key file for a specific virtual service.

7.5. Update License

This option permits the input of a new license key. I.e. when updating from an evaluation to a full license.

7.6. Diagnostics

This menu allows the user to perform diagnostic functions on the LoadMaster.

Ping Remote Host

A remote host may be “pinged.

Enable Diagnostic login

Important: The option “Enable diagnostic login” should only ever be enabled when requested to by

LoadMaster support staff.

If this option is enabled in normal operation, this may result in unauthorized access to the LoadMaster. The

diagnostic login will be disabled upon reboot of the LoadMaster or it can be disabled from this menu.

Show Partner IP Address

If the LoadMaster is being used in a HA configuration and the real addresses of either partner is changed, it

can cause both LoadMasters to no longer communicate with each other. This option allows the changing of the
partners IP address so that communication can be restored.

«
...
43
44
45
46
47
...
»

Summary of Contents for LoadMaster 1500








































































Reviews:

No comments

Related manuals for LoadMaster 1500

Brand: Linksys Pages: 2

S5120V3-EI Series

Brand: H3C Pages: 54

Brand: Ublox Pages: 116

Brand: H3C Pages: 116

Brand: E-TOP Pages: 76

Brand: Acqiris Pages: 22

Brand: FOR-A Pages: 2

Brand: Conceptronic Pages: 230

Brand: Caimore Pages: 79

Brand: QNAP Pages: 54

COMMWARE ECHO 5G

Brand: pivotal Pages: 2

Brand: 1&1 Pages: 32

WNFB-265AXI(BT)

Brand: Sparklan Pages: 14

Converter Board R0E521237CFK00

Brand: Renesas Pages: 6

640 - Pentium 4 640 3.2GHz 800MHz 2MB Socket 775 CPU

Brand: Intel Pages: 105

Brand: Juniper Pages: 420

802.11a/b/g SDIO WiFi Module SDM3100

Brand: Abocom Pages: 14

Brand: Intel Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands