background image

10

1. 

Kemlan wood heaters carry a warranty on the 6mm firebox for a period of ten (10) years.

2. 

This warranty also covers other components of the heater for a period of one (1) year.  

 

These components include the baffle plate, handle assembly and fan.

3. 

Kemlan’s warranty covers the wood heaters against defects in materials and manufacture.

4. 

THIS WARRANTY DOES NOT COVER - 

4.1 

Failure to comply with manufacturer’s operation instructions.

4.2 

Normal wear and tear or damage caused by incorrect installation.

4.3 

Any form of rust and/or corrosion to the painted finish of the heater.

4.4 

Damage to the glass in the door, if the damage is caused by impact or misuse.

4.5 

The cost of collection and delivery of the wood heater and/or parts.

4.6 

Damage caused by water ingress.

4.7 

Cost of removal of defective heater or re-installation of replacement heater.

5. 

CLAIMS - 

5.1 

(i)  Kemlan will provide a full replacement of the heater in the first five years after installation.

(ii) Replacement in the subsequent five years (i.e. sixth to tenth year after installation will be on the 

following basis.

Owner will pay twenty percent of purchase price if the claim is made in the sixth year and a further ten percent 

per year in every subsequent year to a maximum of fifty percent of the purchase price of the heater.

5.2 

Replacement of heater subject to all conditions in section four of warranty.

5.3 

Should any defects occur, contact the Kemlan distributor from whom you purchased the heater.

5.4 

Under this warranty the defective parts will be repaired or replaced by Kemlan’s option, free of charge.

6. 

The fireplace installation must comply with the relevant local statutes, ordinances, regulations

 

and by-laws.

PLEASE COMPLETE AND RETAIN THIS SECTION FOR YOUR RECORDS

Purchased from:  .......................................................................................................

Address:  ....................................................................................................................

Date of Purchase:  ......................................................................................................

WARRANTY

Summary of Contents for XL











Reviews: