6.
Lower the frame to the ground.
7.
Remove the chain or strap placed around the frame and transport in Step 2.
8.
Attach the hydraulic cylinder to the frame at the clevis on the cross member. Remove the
plugs from the cylinder ports to prevent an airlock when the rod/piston moves in the cylinder
barrel.
9.
By raising and lowering the back of the frame, the rod end of the cylinder can be pinned to the
transport. Once the cylinder is connected, raise the rear of the disc until the wheels clear the
ground. At that point the cylinder should be fully extended.
10.
Place the transport stay over the cylinder and lower the disc to the ground.
26
