23
T
(Return)
P
(Pressure)
Note:
The RETURN hose is thicker
than the PRESSURE hose.
Pressure
1/2"
Return
3/4"
IMPORTANT!
If the hoses are fitted incorrectly, the gasket in the motor is pushed out,
resulting in leakage. The motor cannot be used until the gasket has
been replaced. Pressure in the leakage line must not exceed pressure
in the return hose.
HYDRAULIC DIAGRAM
If the tractor/carrier vehicle has an oil flow between 30 and 45 l/min.,
the strimmer is fitted with a check valve on the return hose, (thick hose
marked in the figure) IMPORTANT! Leakage line must be connected
to tank. Max. pressure 0 bar.
If the vehicle has an oil flow higher than 45 l/min. (max. 60 l/min.),
fit the strimmer without a check valve.
IMPORTANT! Leakage line must be connected to tank. Max. pressure 0 bar.
Back pressure on the return must not exceed 10 bar.
T
Leakage line
Summary of Contents for 35-HKK
