15
TRANSPORT MODE
When the mower is to be moved from one workplace to another, it must be put in transport
mode. The tractor engine must be switched off and the rotor completely stationary before
adjusting to transport mode.
Remove all grass from the mower before leaving the field. Never move from one place to another
with the rotor running.
INSPECTION
It is very important to check the machine regularly in order to detect and prevent wear
and tear, damage, etc.
•
Grease moving parts regularly. All lubrication points should be greased after every
30 hours of use. NOTE: Slowly and carefully pump in grease to prevent damage to the
bearing seals. Be extra careful when using a high-pressure grease gun.
NOTE: Grease nipples located under the machine
IMPORTANT!
FOR REPAIRS OTHER THAN THE PREVIOUSLY LISTED ADJUSTMENTS, CONTACT YOUR LOCAL DEALER.
Summary of Contents for 35-HKK
