20
a.) Connect hydraulic hose 1A to valve control 1A (see marking)
b.) Connect hydraulic hose 1B to valve control 1B (see marking)
c.) Connect the remaining hoses as described above.
NOTE: 1.)
Hydraulic coupling
: Connect hydraulic hoses 1A and 1B on the right-hand side
of the arm and secure using hose clamps. Hoses 2A and 2B on the left-hand side. Use hose
clamps to secure the hoses.
2.)
Filling methods
: When topping up oil for the first time, the tank must be filled to a level
between the red and black lines in the sight glass. Start the engine, run the functions,
extend all cylinders and then retract them. Then top up the tank again with oil between
the red and black lines.
oil plug
level gauge
P
T
1A 2A 3A 4A
1B 2B 3B 4B
1A-- 1A
1B-- 1B
2A-- 2A
2B-- 2B
3A-- 3A
3B-- 3B
4A-- 4A
4B-- 4B
1A
2A
3A
4A
1B
2B
3B
4B
ITEM NO.
DESIGNATION
QUANTITY
24
Hydraulic hose 700 mm
2
61
Hydraulic hose 1100 mm
1
71
Hydraulic hose 850 mm
1
99
Hydraulic hose 2850 mm
1
100
Hydraulic hose 2550 mm
1
101
Hydraulic hose 2100 mm
1
102
Hydraulic hose 1700 mm
1
