20
INSTRUCTIONS FOR TIPPING THE FLOOR:
In order to tip the floor, the trailer must be equipped with a winch – see previous page for information
about the winch!
The trailer can be unloaded manually or by tipping the floor backwards.
Observe the maximum permitted axle load!
•
Important!
If the floor is to be unloaded by tipping, the floor must not be loaded more than 250 kg!
•
Only load the floor when the trailer is connected to the vehicle and is parked on level ground.
•
Distribute the load evenly over the entire floor area.
•
Always load by weight not by volume!
•
IMPORTANT! The operator (the person tipping the floor) must stand behind the crane.
•
People must not be in the trailer!
Make sure that the hook is hooked onto the floor’s towing eye – see illustration below:
Wind slowly so that the wire rope becomes taut, check that the hook is securely attached and
cannot come loose. Continue cranking the winch until the floor is at the right angle.
The height and length of the boom can be adjusted in 3 different positions
•
Be aware of the crush risk when carrying out winching work.
•
Always watch out for a misaligned wire rope!
1
1
2
2
3
3
IMPORTANT!
Make sure that the wire
rope runs correctly before
winching, the wire rope
should run under the guide
pin – as illustrated.
Summary of Contents for 23-TV07PRO
Page 22: ...22 Table of contents NOTES...