background image

10

Table of contents

WARNING DECALS

Make sure warning decals are always visible and clean them when necessary. 

 

Do not use a high-pressure washer directly on the warning decal. If apart with a decal is  
replaced, or the decal becomes worn or in any other way unusable, order a new set of decals.

SYMBOL

EXPLANATION

 

Read the operating manual! Before carrying out work.
Warning! Prior to performing maintenance, servicing, 
hitching and unhitching the trailer, the engine of the towing 
vehicle must be turned off and the ignition key removed. 

 

Warning! Risk of crushing!

Risk area of 15 metres.
Respect the equipment’s risk zone!

WARNING! Risk of crushing!  
Do not permit anyone to stand under suspended loads!
Risk zone! Keep your distance!

 

Always use stabilisers when loading/unloading.
Retighten all bolts and connections.

Warning! Keep off the trailer! 

Warning! Accident risk for children!
Children are not allowed in the vicinity of the trailer.

Always store the product on a dry surface, preferably under  
a roof, when not in use.

The product is CE-labelled

Product name:

Type:

Weight:

Year of manufacture:

Serial no.:

2006/42/EC

Summary of Contents for 23-TV07PRO

























Reviews: