background image

4

Table of contents

SAFETY INSTRUCTIONS

Before using the equipment or product, and for the safety of yourself and others, you must read 

the safetyinstructions and instruction manual and understand their contents. Always keep the 

safety instructions and operating manual handy for users of the equipment or product. For the 

safety of both yourself and others, it may be a good idea to read through the safety instructions 

every now and then. If the safety instructions or the operating manual are damaged, or become 

unusable for any other reason, new copies may be ordered from: Kellfri AB, Munkatorpsgatan 6, 

SE-532 37 SKARA, Sweden. Tel.: +46 511 242 50

The safety instructions can also be downloaded from Kellfri's website:

 

www.kellfri.co.uk

Do not use the equipment or product if you feel ill, tired or are under the influence of alcohol. 
Do not use the equipment or product if you are taking prescribed medication or drugs, or 
suffering from severe depression or mental illness. Always comply with general rules of the road 

and applicable rules stipulated by animal welfare legislation. People under the age of 15 are not 

allowed to use the equipment.

INSTRUCTIONS FOR EMERGENCY SITUATIONS

In case of emergency, call 112.

Always have a mobile phone or emergency phone available when working alone. 

 

A first-aid kit and fire extinguisher must be kept in an easily accessible location when carrying 

out any work, maintenance or service.

Warning! 

The original design of the machine must not, under any circumstances, be modified 
without the approval of the manufacturer. Unauthorised modifications and/or accessories 
may cause life-threatening injuries or death to users and others.

PERSONAL PROTECTION

Always use suitable protection equipment. Do not wear loose clothing or jewellery while 

working with the equipment. Long hair should be tied up when working with equipment 

that has moving parts. Use protective gloves to avoid the risk of burns if hot surfaces such 

as exhaust pipes are touched, and to avoid oil and petrol getting in contact with the skin.  

Ear defenders must be worn whilst the engine is running. 

Kellfri is not liable for any modifications, changes or rebuilds carried out by customers.

Where the machine is used professionally, employers are responsible for ensuring that users  

of the machine have theoretical and practical knowledge of the machine and that work  

is performed in a safe manner. Stay informed by complying with work environment legislation; 

contact your local work environment authority.

Summary of Contents for 23-TV07PRO

























Reviews: