14
211
2.00A
4
A-L c
C
S
/
L
>
.
S
o
c
C
M
.
.
< S
L
L
S
E1
E2
E3
E4
Start Procedure
P= Yes <>= Abort
Warming up motor
.. let’s go ..
Running Close
before start 1/4
Please wait ...
Erasing old data
Arrived at zero
close position
Arrived Open Pos
Open position
MENU :
AUTO Prog.
→
→
Arrived at zero
Confirmed
Arrived Open Pos
Confirmed 2/4
Field assembly & commissioning
smart slider - Field assembly & commissioning
14. Menu modus
14.4 MENU AUTO PROGRAM
Push "P" (=
E3
) button to
start procedure
Starting up
Motor runs to zero
position, CLOSE
Erasing old data
'CLOSE' position
detected
'OPEN' position
detected
< >
(
E2
&
E4
) = abort
NOTE:
Always ensure that this action is performed under
safe conditions
by a
specialized technician
.
During this operation,
there is no obstacle detection
as automatic motor actions take place.
Mark the area in which the window is moving and make sure that
no obstacles and / or people are in the area
during the gradient.
Once started, the
process is fully automatic
.
Use the RESET button E1 at any danger to abort immediately.
→ → → →
Make sure that the
end stops in the opening and closing
direction are properly adjusted
and secured with the screws!
Parameter explanation
LCD screen
Additional information
27
Keller minimal windows
®
|
997-00210
| 07-2022
Keller minimal windows
®
Summary of Contents for LD350
