Operating Manual PT 18x
32
------------------------------------------------------------------
Submenu CALIBRATION
------------------------------------------------------------------
Name .... "Pyrometer PT Series"
Menu mode ............. default
0: [QUOTIENT CALIBRATION]
1: [LAMBDA 1 CALIBRATION]
2: [LAMBDA 2 CALIBRATION]
A: Reset settings to factory default
E: Set menu mode
S: Set pyrometer name
Z: End Calibration-Mode
ESC: Back to MAIN-MENU
------------------------------------------------------------------
>CALIBRATION >
You can reset all configurations you have made to your CellaCast PT
and restore the factory default settings using Command „A“.
This also applies to data acquisition parameters, LED and buzzer.
Press command "E" if you would like to view all parameters which are
otherwise hidden. Because this list of menu items is quite long (Chapter
12.1), we only recommend this for advanced users. If you intend to carry
out measurements of molten metal only, it makes sense to maintain the
factory configuration. This will keep those parameters, which will not re-
quire adjustment, hidden.
Command "S" enables the user to enter a short word to designate the
measurement location/task. This text can be accessed from the Main
Menu by pressing "Q".
Specific settings regarding the measurement channels can be found in
configuration layers "0", "1" and "2".
------------------------------------------------------------------
Submenu QUOTIENT
------------------------------------------------------------------
Qu range .... 650.0 - 1700.0 C
Qu User calibration ....... off
Qu User def. offset +0.00000
Qu User def. factor +1.00000
A: Set Qu - extended-range
B: Set Qu User-Cal. On/Off
C: Set Qu User-Cal. Offset
D: Set Qu User-Cal. Factor
ESC: Back to MAIN-MENU
------------------------------------------------------------------
>CALIBRATION >QUOTIENT >
Use command "A" to reconfigure the
pyrometer‘s measuring range (in
two-colour / ratio mode). The range can be adjusted to be either larger or
smaller than the factory-configured range. When customizing the tem-