Operating Manual PT 18x
28
15.3 Submenus
15.3.1 Configure two-colour/ratio mode
Submenu QUOTIENT
------------------------------------------------------------------
Qu epsilon ratio ...... 101.0 %
Qu check L2 rel.limit 5.00 %
Qu abs.limit 650 C @ 50.00 %
Qu linearization .......... off
Qu filter .......... 0.50 s
Qu memory type ............ ATD
C: [CONFIG EPSILON TABLE]
E: Epsilon
U: [Q-CHECK]
L: [LINEARIZATION]
F: Filter
M: [MEMORY]
P: Show parameter
Q: Show calibration data
O: Show signal intensity
X: Show measure temperatures
Y: Show premax measure temps.
ESC: Back to MAIN-MENU
------------------------------------------------------------------
>QUOTIENT >
15.3.2 Configure single-wavelength mode Lambda 1
Press key „1“ to access all data logging parameters for Lambda 1 (L1).
------------------------------------------------------------------
Submenu LAMBDA 1
------------------------------------------------------------------
L1 epsilon ............ 99.0 %
L1 transmission ....... 100.0 %
L1 backc. ................. off
L1 linearization .......... off
L1 filter .......... 0.10 s
L1 memory type ............ off
C: [CONFIG EPSILON TABLE]
E: Epsilon
T: Transmission
B: Background-Compensation
L: [LINEARIZATION]
F: Filter
M: [MEMORY]
P: Show parameter
Q: Show calibration data
X: Show measure temperatures
Y: Show premax measure temps.
ESC: Back to MAIN-MENU
------------------------------------------------------------------
>LAMBDA 1 >