Spare paddles are available for the F29 flow switch from your supplier.
time displayed on the hour meter represents the actual hours the pump has
run for in total. To reset the hour meter to zero, press the
(v)
button. To exit
out of the hour meter screen press
(P)
. The hour meter accumulates running
time and does not lose its memory of the total pumping hours even if the
power is switched off for extended periods. The meter can accumulate up to
7.4 years of total running time before it automatically resets to zero.
The F29 is a minimal maintenance device. If it is correctly installed in a
location that is out of direct exposure to the elements it should give a
long and reliable life and require no maintenance at all. Factors that may
reduce its life are lightning strikes or power surges, failure to fully tighten
its lid and cable glands, exposure to pressures or temperatures in excess
of its ratings and operation outside its electrical limitations in terms of
supply voltage and motor loads.
SPARE PARTS
MAINTENANCE
If the F29 Programmable Flow Switch is used in a
manner not specified by the manufacturer the
pump protection provided by the F29 may be
impaired or negated. In addition, all warranties
stated or implied may be rendered invalid.
34
