To activate the lock, press and hold down the
(^)
and
(v)
buttons and then
press and release the
(R)
button. Continue to hold the
(^)
and
(v)
buttons
down until the screen displays
LOCK
. (takes about 2 seconds) release the
(^)
and
(v)
buttons. The F29 is now locked. When locked, pressing the
(P)
button will not allow access to the F29’s menu, instead a message
PROGRAM LOCKED PRESS RESET
is displayed on the screen.
UNLOCKING THE F29
To unlock the F29 repeat the above procedure, press and hold down the
(^)
and
(v)
buttons and then press and release the
(R)
button. Continue to hold
the
(^)
and
(v)
buttons down until the screen displays
UNLOCKED
. (takes
about 2 seconds) release the
(^)
and
(v)
buttons
GETTING STARTED
1) Use the least number of functions possible. Do not program in functions
you do not specifically require, as to do so will make the system’s operation
unnecessarily complicated and may introduce unpredictable interactions
between the various functions.
2) When changing major settings always start by purging the previous
settings to restore factory defaults before proceeding (see page 3). This
ensues no conflicts occur between previously set functions and new
functions.
The F29 is supplied by the factory in an unlocked state and can be
programmed using its buttons. To prevent unauthorised personnel from
altering its settings, the programming button
(P)
can be locked.
LOCKING THE F29
With the F29 powered up, Press the (P) button. Hold it down for 1
second and then release it.
Kelco www.kelco.com.au
This is the first screen in the menu.
Press and release (P) again.
F29 MK3 Controller Version 000000
The version number must match the
number on the cover of this book.
Press and release (P) again.
LOCKING & UNLOCKING THE F29
24
