Keithley TEC SourceMeter 2510, Service Manual, Page: 115 / 120

C-6 Calibration Program Models 2510 and 2510-AT
‘
ErrCheck: ‘ Error check routine.
PRINT #1, “OUTPUT 15;:SYST:ERR?” ‘ Query error queue.
PRINT #1, “ENTER 15”
INPUT #2, E, Err$
IF E <> 0 THEN PRINT Err$: GOTO ErrCheck’ Display error.
RETURN
‘
ReadDMM: ‘ Get reading from DMM.
SLEEP 3
PRINT #1, “OUTPUT 16;:READ?”
PRINT #1, “ENTER 16”
INPUT #2, Reading$
RETURN
‘
EndProg: ‘ Close files, end program.
BEEP: PRINT “Calibration aborted.”
PRINT #1, “OUTPUT 15;:CAL:PROT:LOCK”
PRINT #1, “OUTPUT 15;*RST”
PRINT #1, “LOCAL 15 16”
CLOSE
END
‘
CmdList: ‘ Calibration command list.
DATA “:OUTP ON”,”:SOUR:VOLT 8.5”,”CAL:PROT:SENS:VOLT “,”CAL:PROT:SOUR “
DATA “:SOUR:VOLT 0”,”:CAL:PROT:SENS:VOLT “,”:CAL:PROT:SOUR “
DATA “:SOUR:VOLT -8.5”,”:CAL:PROT:SENS:VOLT “,”:CAL:PROT:SOUR “,”:OUTP OFF”
DATA “:OUTP ON”, “CAL:PROT:SENS:CURR “,”CAL:PROT:IPD”,”:OUTP OFF”
DATA “:SYST:RSEN ON”,”:SENS:TEMP:TRAN THER”
DATA “:SENS:TEMP:THER:RANG 100”,”CAL:PROT:SENS:TEMP “,”CAL:PROT:SENS:TEMP 0”
DATA “:SENS:TEMP:THER:RANG 1E3”,”:CAL:PROT:SENS:TEMP “,”CAL:PROT:SENS:TEMP 0”
DATA “:SENS:TEMP:THER:RANG 1E4”,”:CAL:PROT:SENS:TEMP “,”CAL:PROT:SENS:TEMP 0”
DATA “:SENS:TEMP:THER:RANG 1E5”,”:CAL:PROT:SENS:TEMP “,”CAL:PROT:SENS:TEMP 0”
DATA “:SENS:TEMP:TRAN RTD”,”:SENS:TEMP:RTD:RANG 100”
DATA “:CAL:PROT:SENS:TEMP “,”:CAL:PROT:SENS:TEMP 0”
DATA “:SENS:TEMP:RTD:RANG 1E3”,”:CAL:PROT:SENS:TEMP “,”CAL:PROT:SENS:TEMP 0”
DATA “:SENS:TEMP:TRAN ISS”,”:CAL:PROT:SENS:TEMP “,”:CAL:PROT:SENS:TEMP “
DATA “:SENS:TEMP:TRAN VSS”,”:CAL:PROT:SENS:TEMP “,”CAL:PROT:SENS:TEMP 0”
DATA “:CAL:PROT:RES “,”:OUTP ON”
DATA “:CAL:PROT:SOUR:AUTO”,”:OUTP OFF”
2510-902-01 (E - Mar 2010)(Service).book Page 6 Tuesday, March 16, 2010 1:04 PM