3-4
Setup and Installation
5. Select Install Documentation. If you do not have Adobe Acrobat
installed on your computer, install it by selecting Install Adobe
Acrobat.
6. Open the manuals appropriate to the PIO-SSR installation and read
them before installing your PIO-SSR board or configuring
DriverLINX:
–
Installation and Configuration
–
Using DriverLINX with Your Hardware—Keithley PIO Series
–
DriverLINX Technical Reference Manual
–
DriverLINX Digital I/O Programming Guide
–
DriverLINX Analog I/O Programming Guide
–
DriverLINX Counter/Timer Programming Guide
–
Appendix, I/O Port, Interrupt, and DMA Channel Usage
–
Other manuals appropriate to your installation.
7. Before installing a PIO-SSR board in your computer, make sure that
the switches are set appropriately and that you have noted the switch
settings so that you can match these settings when you program the
configuration using DriverLINX. Refer to the
DriverLINX
Installation and Configuration Guide and Using DriverLINX with
Your Hardware—Keithley PIO Series
manuals
.
8. Install your PIO-SSR board into an appropriate free slot in your
computer when DriverLINX prompts you to do so.
Note:
If switches on the board are changed after the software has been
installed, the software will need to be reconfigured.
Refer to the documentation provided with your computer for more
information on installing boards.
Follow the DriverLINX on-screen instructions for installation of drivers
and interfaces. Refer to the
DriverLINX Installation and Configuration
Guide and Using DriverLINX with Your Hardware—Keithley PIO Series
manuals
.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
