Programming Flowcharts
61
4
4
4
4
4
4
4
4
4
Set Up Channel List and Channel Parameters
olDaSetChannelListSize
Use to specify the size of the analog input channel-gain
list (maximum of 16) or analog output channel list
(maximum of 2). The default value is 1.
olDaSetChannelListEntry
Specify the channels in the A/D or D/A channel list. For
the A/D subsystem, channels 0 to 7 are available; you
can specify up to 16 channels in the channel-gain list.
For the D/A subsystem, channels 0 and 1 are available;
you can specify up to 2 channels in the output-channel
list. If you want to update both DACs, enter 0, then 1 in
the list.
olDaSetGainListEntry
For the A/D subsystem only, specify the gain for each
channel in the channel list (1, 2, 4,or 8).
For the D/A subsystem, use a gain of 1 (the default).
Summary of Contents for KUSB-3100
