Keithley DAS-4300 Series, User Manual, Page: 64 / 94

4-8 Scope and Test Program
Options Menu
Table 4-6 lists the miscellaneous parameters of the Options menu. You
can access the Options menu at any time by pressing the
O key.
Data type Specifies the data format of the display as either twos
complement, binary, or absolute value.
Zero wait Turns the synchronous ready bus signal on or off. If
synchronous ready is on and the DAS-4301/8K board and
the host computer motherboard are synchronized correctly,
data transfer takes place at high speed. However, if
synchronous ready is on and the DAS-4301/8K board and
the motherboard are not synchronized correctly, errors will
appear in the waveform.
Table 4-5. Options Menu
Parameter Description
Make D4300.ADC When Yes, creates a special parameter file called
D4300.ADC with the current settings in the program. At
program startup, D4300.EXE automatically loads
D4300.ADC with the initial values for all the menu
entries. The program displays No if the file has already
been created.
Printer type/
resolution/port Specifies the type of printer that is used if the P key is
pressed.
Show debug Not currently implemented.
DSP Transfers the currently visible portion of the displayed
waveform over the Synchro-Link bus. On-screen
waveform updates cease but triggers remain active.
Table 4-4. Display Menu (cont.)
Parameter Description