Keithley DAS-4300 Series, User Manual

Page: 38 / 94

3-4 Setup and Installation
When the installation program prompts you for a directory name,
enter a name of your choosing or accept the default name.
The installation program creates a directory on the specified drive and
copies all files, expanding any compressed files.
5. When the installation program notifies you that the installation is
complete, review the following files:
– FILES.TXT lists and describes all the files copied to the hard disk
by the installation program.
– README.TXT contains information that was not available when
this manual was printed.
Windows Installation
To install the Windows version of the ASO-4300 software package,
perform the following steps:
1. Make a backup copy of the ASO-Windows disk. Use the copy as your
working disk and store the original as a back up.
2. Insert the ASO-Windows disk into the disk drive.
3. Start Windows.
4. From the Program Manager menu, select File and then select Run.
5. Assuming that you are using disk drive A, type the following at the
command line in the Run dialog box, and then choose OK:
A:SETUP
The installation program prompts you for your installation
preferences, including the drive and directory you want to copy the
software to. It also prompts you to insert additional disks, as
necessary.
6. Continue to insert disks and respond to prompts, as appropriate.
When the installation program prompts you for a drive designation,
enter a designation of your choosing or accept the default drive C.
When the installation program prompts you for a directory name,
enter a name of your choosing or accept the default name.
The installation program creates a directory on the specified drive and
copies all files, expanding any compressed files.