Keithley DAS-4300 Series, User Manual

Page: 43 / 94

Configuring the Board 3-9
If the utility finds a configuration file named filename , it displays the
opening menu screen with filename shown; this file contains the
configuration options found in filename . If the utility does not find a
configuration file named filename , it displays the opening menu
screen with filename shown; this file contains the default
configuration options. If you do not enter a file name, the utility
displays the opening menu screen of the default configuration file
DAS4300.CFG.
Note:
The example programs, provided with the ASO-4300 software
package, use the default configuration file DAS4300.CFG. If you
intend to use the example programs, make sure that DAS4300.CFG
exists and that the settings in DAS4300.CFG match the jumper
settings of your board.
2. On the opening menu screen, enter the number of DAS-4301/8K
boards you plan to configure (1 or 2).
The utility displays the configuration options for the first board
(board 0). The number of the board is shown in the upper-left corner
of the top menu box.
3. To modify any of the configuration options, use the arrow keys to
highlight the option you want to change, press Enter to display a list
of available settings, use the arrow keys to highlight the appropriate
setting, and press
Enter . These instructions are summarized in the
Commands/Status box at the bottom of the screen.
When the configuration options for this board are correct, press N to
display the configuration options for the next board.
4. After you modify the appropriate configuration options for all boards,
press Esc. The utility asks if you want to save the new settings to the
specified configuration file.
5. Press Y to save the new settings and exit. Press N to exit without
saving the new settings.
When you finish creating or modifying the configuration file, refer to the
following section to ensure that the jumper settings on the board match
the settings in the configuration file.