Installing the Software
3-3
When the installation program prompts you for a directory name,
enter a name of your choosing or accept the default name.
The installation program creates a directory on the specified drive and
copies all files, expanding any compressed files.
5. When the installation program notifies you that the installation is
complete, review the following files:
–
FILES.TXT lists and describes all the files copied to the hard disk
by the installation program.
–
README.TXT contains information that was not available when
this manual was printed.
Installing the ASO-4300 Software Package
The ASO-4300 software package contains software for both the DOS and
Windows environments. This section describes how to install both the
DOS version and the Windows version of the ASO-4300 software
package.
DOS Installation
To install the DOS version of the ASO-4300 software package, perform
the following steps:
1. Make a backup copy of the supplied disks. Use the copies as your
working disks and store the originals as backup disks.
2. Insert disk #1 into the disk drive.
3. Assuming that you are using disk drive A, enter the following at the
DOS prompt:
A:install
The installation program prompts you for your installation
preferences, including the drive and directory you want to copy the
software to. It also prompts you to insert additional disks, as
necessary.
4. Continue to insert disks and respond to prompts, as appropriate.
When the installation program prompts you for a drive designation,
enter a designation of your choosing or accept the default drive C.
Summary of Contents for DAS-4300 Series
Page 1: ...DAS 4300 Series U S E R S G U I D E...
Page 2: ...DAS 4300 Series User s Guide Revision A June 1995 Part Number 94520...
Page 21: ...2 6 Functional Description Figure 2 2 Host Computer Memory Address Space...
Page 90: ...C 9 Figure C 16 0 125 V Input Range Gain Code 15 0 125 V Input Range Gain Code 15...
