![background image](http://html1.mh-extra.com/html/keithley/3700-series/3700-series_reference-manual_3931523246.webp)
Section 9
:
Instrument Control Library (ICL)
Series 3700 System Switch/Multimeter Reference Manual
9-102
Document Number: 3700S-901-01 Rev. A / August 2007
dmm.math.mxb.units
Attribute
Specifies the unit character for the y = mx + b operation.
Usage
To read unit character for y = mx + b operation:
value = dmm.math.mxb.units
To write unit character for y = mx + b operation:
dmm.math.mxb.units = value
value
: Valid characters, A to Z, '[' char for micro symbol (as in µV), use ']' char for ohm
symbol (as in
) and use '\\' char for degree symbol (as in °).
Remarks
This attribute represents the unit character to use when the math format is set for mx +
b (dmm.math.format = dmm.MATH_MXB).
Default setting is ‗X‘.
Also see
dmm.math.format
(on page 9-100)
Example
To set the units for mx +b operation to 'Q':
dmm.math.mxb.units = 'Q'
dmm.math.percent
Attribute
Specifies the constant to use for the percent operation.
Usage
To read the constant for the percent operation:
value = dmm.math.percent
To write the constant for the percent operation:
dmm.math.percent = value
value
: Valid range is -4294967295 to +4294967295
Remarks
This attribute represents the constant to use for percent.
Also see
dmm.math.format
(on page 9-100)
Example
To constant for percent operation to 1250:
dmm.math.percent = 1250
To acquire the percent constant:
dmm.math.percent = dmm.measure()