Model 2701 User’s Manual
Close/Open Switching Module Channels
2-5
Connections
WARNING
Connection information for switching modules is intended for qualified ser-
vice personnel. Do not attempt to connect DUT or external circuitry to a
switching module unless qualified to do so.
WARNING
To prevent electric shock that could result in serious injury or death, adhere
to the following safety precautions:
•
Before making or breaking connections to the switching module,
make sure the Model 2701 is turned off and power is removed from all
external circuitry.
•
Do not connect signals that will exceed the maximum specifications of
switching modules. Each module is provided with its own unique
specifications.
WARNING
If both the front panel terminals and the switching module terminals are
connected at the same time, the test lead insulation must be rated to the
highest voltage that is connected. For example, if 1000V is connected to the
front panel input, the test lead insulation for the switching module must also
be rated for 1000V.
WARNING
Dangerous arcs of an explosive nature in a high energy circuit can cause
severe personal injury or death. If the multimeter is connected to a high
energy circuit when set to a current range, low resistance range, or any other
low impedance range, the circuit is virtually shorted. Dangerous arcing can
result even when the multimeter is set to a voltage range if the minimum
voltage spacing is reduced in the external connections. For details to safely
make high energy measurements, see Section 3, “High energy circuit safety
precautions.”
As described in the International Electrotechnical Commission (IEC)
Standard IEC 664, the Model 2701 measurement terminals are
measurement Category I and must not be connected to mains.
For the Model 7700, detailed connection and wiring information is provided in
Appendix B of this manual (Model 7700 Connection Guide). Connection and wiring
information for other modules are provided with the individual switch cards.
2701-900-01.book Page 5 Wednesday, August 3, 2011 9:43 AM
Summary of Contents for 2701
