![background image](http://html2.mh-extra.com/html/keithley/2701/2701_user-manual_3950600297.webp)
10-10
Remote Operations
Model 2701 User’s Manual
Ethernet connections
The Model 2701 is connected to the Ethernet using a male-to-male RJ-45 Ethernet cable
(see Figure 10-5). The Ethernet connector for the Model 2701 is shown in Figure 10-6.
With power off, connect one end of the cable to the Model 2701 and connect the other end
to the Ethernet connector of the PC, hub, or receptacle.
Figure 10-5
RJ-45 Ethernet cable (male/male)
RJ-45 connector status LEDs
The female RJ-45 connector (shown in Figure 10-6) has two status LEDs located at the
top of the connector. These LEDs provide the following status:
LED
State
Ethernet status
Link/Act
Off
Network NOT connected
Link/Act
On
Network connected
Link/Act
Blinking
Traffic is traversing the port
100bT
Off
10 mb/s network speed
100bT
On
100 mb/s network speed
Ethernet Cable
RJ-45 male-to-male
2701-900-01.book Page 10 Wednesday, August 3, 2011 9:43 AM
Summary of Contents for 2701
