![background image](http://html2.mh-extra.com/html/keithley/2701/2701_user-manual_3950600211.webp)
Model 2701 User’s Manual
Buffer
6-13
k.
TRACe:NOTify
<NRf>
Specify number of readings that will
set Trace Notify bit
<NRf> = 1 to 449999
Use this command to specify the number of stored readings that will set bit B6 (Trace
Notify) of the measurement event register. See Section 11 for details on status structure.
The maximum valid parameter value for this command is one less than the present
buffer size (which is set by the TRACe:POINTs command). For example,
TRACe:POINts 450000 sets the buffer size to 450,000 readings. For this buffer size,
the maximum valid parameter value for TRACe:NOTify is 449999 (450000-1).
When an invalid parameter value is specified, the command is ignored and causes
error -222 (parameter data out of range).
l.
FORMat:ELEMents
<item list>
Select elements for TRACe:DATA?
<item list> = READing, CHANnel, UNITs, RNUMber, TSTamp
The data returned by TRACe:DATA? can include from one to all five data elements
shown in the above item list. For example, if you want the units and reading number
included with the reading, you would send this command:
FORMat:ELEMents READing, UNITs, RNUMber.
Only the elements defined by the list are used. Elements not included in the list are not
used. You can specify the elements in the list in any order, but they must be separated
by commas.
The data elements that can accompany the reading are summarized as follows. More
details on data elements are provided in Section 14, “FORMat commands.”
•
CHANnel — References the reading to a switching module channel. If the reading
is not for a switching module, channel 000 will be returned.
•
UNITs — Identifies the measurement function (i.e., VDC).
•
RNUMber — References the reading to the buffer reading number.
•
TSTamp — Timestamps the reading (ABSolute or DELTa timestamp as set by the
TRACe:TSTamp:FORMat command).
•
FORMat:ELEMents — READing, CHANnel, UNITs, RNUMber, TSTamp,
LIMits.
2701-900-01.book Page 13 Wednesday, August 3, 2011 9:43 AM
Summary of Contents for 2701
